Clear Guide M

EnvisionTEC’s Clear Guide M is a crystal clear material for the production of accurate drill guides on the Perfactory® line of 3D Printers. The results produced by combining Clear Guide M with EnvisionTEC technology are superior to traditional methods of manufacturing implant placement guides. The clearest material available on the market today allows for maximum visibility. High resolution 3D printing allows for precisely targeted placement of implants. Finally, the cost of high quality drill guides can be dramatically lower when produced using Clear Guide M on an EnvisionTEC 3D printer in comparison to previous machining methods, making EnvisionTEC the clear choice for any digital dental laboratory.

Physical Properties


339.8 mPa*s (Method DIN 1342-2)

Tensile Strength

51.6 MPa (Method DIN EN ISO 527-1)

Elongation at Break

6.62% (Method DIN EN ISO 527-1)

Bending Strain

8.43% (Method DIN EN ISO 178)

Flexural Modulus

1,920 MPa (Method DIN EN ISO 178)

Flexural Strength

88.4 MPa (Method DIN EN ISO 178)

Izod Impact-Notched

4.99 kJ/m2 (Method DIN EN ISO 178)


1.185 g/cm3 (Method DIN ISO 1183-1)

Hardness (Shore D)

85 Shore (Method DIN EN ISO 868)

Glass Transmission Temperature

86 C – 160 C (Method DIN 53765)

Recommended Machines